|
 Perfection
Loop (Loop to Loop)
The perfection loop knot is used for attaching two looped
pieces of monofilament together. Sometimes used for
a quick change of leaders. This is a dependable and
strong when formed properly.
Step 1. Take the standing line in your left hand
and form a loop by crossing the tag end over itself
with your right hand. Pinch between the thumb and index
finger in your left hand where it crosses leaving about
5 inches of the tag end exposed to work with. Form a
smaller loop in front of the larger loop by bringing
the tag end in front of the first formed loop. Pinch
this in with the first crossover.
Step 2. Take the tag end, wrapping it around
the back of both loops and then between the two loops.
After you go between both loops add that to what you
are pinching down between your fingers.
Step 3. With your right hand, reach through the
first formed loop taking the second smaller loop between
your thumb and index finger and pulls it through the
first loop. Moisten and slowly pull on the standing
line continuing to hold the smaller loop that you pulled
through. Trim the tag end close and the loop knot is
complete.
|